Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-116 Fabric OS Command Reference Manual

Publication Number: 53-1000240-01

defZoneDelete

Note: Enter commands in lowercase only; mixed case is for readability.

defZoneDelete

Deletes the default zone configuration.

Synopsis defzonedelete

Description Use this command to delete the default zone configuration.

This command changes the defined configuration. This command deletes the cfg "d_efault_Cfg" that

contains the zone "d_efault_Zone" that in turn contains the zone member "00:00:00:00:00:00:00:00".

If "d_efault_Cfg" is the effective zone configuration, this command executes cfgDisable; otherwise, it

executes cfgSave.

Also, this command deletes the alias "d_efault_Zone_Alias" that has the member "1,0".

ote

This command requires a Brocade Advanced Zoning license.

When security is enabled, this command can be issued only from the primary FCS switch.

Names with the “d_efault” prefix are reserved for default zoning use.

If “d_efault_Cfg” is the effective zone configuration, then both cfgShow and cfgActvShow will display

“DefaultZone” as the effective zone configuration.

Operands None

Examples To delete a default zone configuration: