Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-124 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
diagHelp
2
Note: Enter commands in lowercase only; mixed case is for readability.
diagHelp
Displays diagnostic command information.
Synopsis diaghelp [command]
Description Use this command to display a short description of diagnostic commands that are available to the user if
command is not specified. The command builds a database of command information during the first
execution. This process takes a few seconds to complete.
N
ote
Use default operands when running diagnostics commands. Nondefault settings require detailed
knowledge of the underlying hardware and are intended for support personnel only. Contact support if
you want to use these operands.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operand:
command Specify a command name to display more detailed information.
Examples To display diagnostic command information:
See Also none
switch:admin> diaghelp
bladepropshow display blade properties
chippropshow display chip properties
chipregshow display contents of port registers
datatypeshow display available diagnostic data types
diagcommandshow display diagnostic command descriptions
diaghelp display diagnostic command descriptions
diagmodeshow display diagnostic mode configuration
diagoktorun check to see if it is ok to run a diagnostic test
diagshow display diagnostics status
diagstatus display currently running diagnostic tests
itemlist diagnostic list parameter syntax and grammar
information
minispropshow display ASIC pair property
minisregshow display contents of ASIC pair registers.
ptbufshow dump port buffer contents
(output truncated)