Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-128 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
diagRetry
2
Note: Enter commands in lowercase only; mixed case is for readability.
diagRetry
Sets or displays diagnostic retry mode.
Synopsis diagretry [mode | -show]
Description Use this command to enable retry mode if the mode value is nonzero and to disable the retry mode if the
mode value is 0. The mode is saved in flash memory (and stays in that mode) until the next execution of
diagRetry. The mode becomes active as soon as this command is executed; it does not require a reboot
to take effect.
Retry mode modifies the behavior of the diagnostic test methods, power-on self-test (POST), and burn-
in scripts. The exact behavior depends on the tests and scripts that are run.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following optional operands:
mode Specify 1 to enable, 0 to disable retry mode.
-show Specify this operand to display the current mode setting.
If no operand is specified, the current value is displayed.
Examples To view the current retry mode value:
See Also none
switch:admin> diagretry -show
Diagnostic Retry Mode is currently enabled.