Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-130 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
diagSetCycle
2
Note: Enter commands in lowercase only; mixed case is for readability.
diagSetCycle
Sets diagnostic script parameters.
Synopsis diagsetcycle script [-show | -default | [-keyword value]]
Description Use this command to provide an interactive method to update diagnostic command parameters. If only
script is specified, the command displays all configuration variables used by the specified script and enter
an interactive session. Using the full parameters, variables can be updated noninteractively.
In interactive mode, the current value, default value, and description of purpose of the variable are
displayed for each variable. If no new value is specified, the current value is left unchanged. If a new
value is entered, its value is updated and stored in the configuration database for that blade type. This
command does not require a reboot to take effect.
N
ote
It is advisable to run the burninErrClear command prior to running diagSetBurnin and diagSetCycle.
Operands This command has the following operands:
script Specify a script in which you want to change parameters.
-show Specify this operand to display the parameters for the specified diagnostic script.
-default Specify this operand to set the script parameters to default values.
-keyword value The script parameters can be updated noninteractively using this style of option
list. value is the keyword to update; the value should be specified manually in this
case.
Examples To update diagnostic command parameters:
See Also burninLevel, diagSetBurnin, diagStopBurnin
switch:admin> diagsetcycle switchburnin.sh -show
CURRENT - KEYWORD : DEFAULT
1 - number_of_runs : 1
2 - vib : 2
10 - thermal : 10
BURNIN - label : BURNIN
1 - tbr_passes : 1
1 - prt_on : 1
1 - cntmem_on : 1
1 - cmi_on : 1
1 - retention_on : 1
1 - cam_on : 1
50 - flt_passes : 50
25 - sta_passes : 25
100 - plb_nframes : 100
50 - txd_nframes : 50
200 - xpt_nframes : 200
20 - bpt_nframes : 20
50 - slk_nmegs : 50
30 - bpt_all_nframes: 30
50 - slk_all_nmegs : 50