Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-137
Publication Number: 53-1000240-01
dlsReset
2
Note: Enter commands in lowercase only; mixed case is for readability.
dlsReset
Disables the dynamic load sharing (DLS) option.
Synopsis dlsreset
Description Use this command to turn off DLS when a fabric change occurs. Refer to dlsSet for a full description of
load sharing.
N
ote
This command should be used only if devices connected to the fabric cannot handle occasional routing
changes correctly.
DLS is not supported in certain routing policies. Refer to aptPolicy for more information on routing
policies.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To disable the dynamic load sharing option:
See Also aptPolicy, dlsSet, dlsShow
switch:admin> dlsreset
Committing configuration...done.
switch:admin> dlsshow
DLS is not set