Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-141
Publication Number: 53-1000240-01
enclosureShow
2
Note: Enter commands in lowercase only; mixed case is for readability.
enclosureShow
Displays attributes of the switch enclosure.
Synopsis enclosureshow attribute
Description Use this command to display attributes of the switch enclosure. Currently, supported attributes are the
vendor-specific enclosure identifier and the identifier of the enclosure interface to which the switch is
attached.
This command is only meaningful for the products that are embedded in a blade server or storage chassis.
Most of the options are applicable to a specific platform. Options that do not apply to a platform are
identified with a “Not supported on this platform” message.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operand:
attribute Attribute of the enclosure to display:
id Displays the vendor-specific enclosure identifier.
modelname
Displays the vendor-specific enclosure model name.
slotid Displays the identifier of the enclosure interface to which the switch is
attached.
rackname
Displays the name assigned by the enclosure manager to this rack.
rackid Displays the serial number assigned by the enclosure manager to this
rack.
enclosurename
Displays the name assigned by the enclosure manager to this enclosure.
enclosureid
Displays the serial number assigned by the enclosure manager to this
enclosure.
connname
Displays the product name used by the enclosure manager for this switch
model.
connaddr
Displays the connector address used by the enclosure manager for this
switch (indicates the physical position of the switch in the enclosure).
connid
Displays the serial number of the switch used by the enclosure manager
(not to be confused with the Factory Serial Number).
conntype
Displays the connector type used by the enclosure manager for this
model of switch.