Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-144 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
errDelimiterSet
2
Note: Enter commands in lowercase only; mixed case is for readability.
errDelimiterSet
Sets the error log start and end delimiter for messages sent to the console and syslog.
Synopsis errdelimiterset [-s "start delimiter string"][-e "end delimiter string"]
Description Use this command to set the error log start and end delimiter for log messages sent to the console and
syslog. An empty string clears the start and the end delimiters (including the colon) so that they are not
displayed.
If no arguments are supplied to the command, it instead displays the existing errDelimiterSet
configuration. These delimiters are stored persistently.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
-s "start delimiter string"
Specify the alphanumeric string for the start delimiter; up to 10 characters are
allowed. This operand is optional.
-e "end delimiter string"
Specify the alphanumeric string for the end delimiter; up to 10 characters are
allowed. This operand is optional.
Examples To display the start and end delimiter:
To change the start and end delimiter (with sample output):
See Also errDump, errFilterSet, errShow
switch:admin> errdelimiterset
delimiter start string: <none>
delimiter end string: <none>
switch:admin> errdelimiterset -s "Start" -e "End"
Start2003/03/10-09:54:03, [NS-1002], 1035,, ERROR, SWITCH43, Name Server received an
invalid request from device 10:02:32:A3:78:23:23:End