Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-145
Publication Number: 53-1000240-01
errDump
2
Note: Enter commands in lowercase only; mixed case is for readability.
errDump
Displays the error log, without pagination.
Synopsis errdump [-s switch_instance][-r][-p]
Description Use this command to display external error log messages for all switch instances and the chassis, without
pagination. The -r operand displays the messages in reversed order. The following information displays
in each message:
Start delimiter Delimiter string for the start of a message.
Timestamp Timestamp for the message.
Message ID Message identifier.
External sequence number
Sequence number for the message
Security audit flag Security audit logged. AUDIT displays in the field.
Severity Severity of the message. Valid values include INFO, WARNING, ERROR, and
CRITICAL.
Switch name Switch name for the generator of this message, or “chassis”.
Message Message body.
End delimiter Delimiter string for the end of a message.
Operands This command has the following operands:
-s switch_instance Displays messages only from switch_instance. Valid values are 0 or 1. This
operand is optional; if omitted, messages from all switch instances are displayed.
-r Displays messages in reversed order. This operand is optional; if omitted, the
messages display in the normal order.
-p Displays error logs from Fabric OS versions prior to v4.2.
Examples To display the error log, without pagination:
See Also errDelimiterSet, errFilterSet, errShow
switch:user> errdump
Version: 4.4.0
2004/07/14-22:24:08, [HAMK-1003], 1,, INFO, switch1, Heartbeat up
2004/07/14-22:24:47, [FSSM-1002], 2,, INFO, switchChassis, HA
State is in sync
2004/07/14-22:25:29, [SEC-1192], 3,, INFO, switch2, Security
violation: Login failure attempt via SERIAL.