Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-151
Publication Number: 53-1000240-01
fabPortShow
2
Note: Enter commands in lowercase only; mixed case is for readability.
fabPortShow
Displays fabric port information.
Synopsis fabportshow [slotnumber/]portnumber
Description Use this command to display the state of a port, relative to the fabric, as well as a list of pending
commands. The following information displays:
Port The port number.
State The state of the port:
P0 Port Offline
P1 Port Online
P2 ELP ACC Received
P3 Link Reset Done
I0 Trunk Initiator: EMT Sent
I1 Trunk Initiator: ETP ACC Received
I2 Trunk Initiator: ETP Sent
I3 Trunk Initiator: Link Reset
T0 Trunk Target: EMT Received
T1 Trunk Target: ETP Received
T2 Trunk Target: Link Reset
LD Dynamic long distance: ECP sent or received
T3 Trunk Target: Link reset done on slave
I4 Trunk Initiator: Link reset done on slave
List The IU list pointer for this port.
Flags Port flags:
0x00000001
Slave connection
0x00000002
Loopback connection
0x00000004
Incompatible connection
0x00000008
Overlapping domains
0x00000010
Overlapping zones
0x00000020
Done PTIO ioctl
0x00000040