Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-153
Publication Number: 53-1000240-01
fabPortShow
2
Note: Enter commands in lowercase only; mixed case is for readability.
ECP RJT or retires exceeded
0x100000000
Segmented due to duplicated WWN
0x200000000
Segmented due to E_Port isolation
nbrWWN Neighboring switch's WWN
nbrPort Neighboring switch’s port
lr_tid Link reset timer identifier and current state.
red_ports All E_Ports that are connected to the same neighboring switch
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
slotnumber For bladed systems only, specifies the slot number of the port to display, followed
by a slash (/).
portnumber Specifies the port number to display, relative to its slot for bladed systems. Use
switchShow to list valid ports.
Examples To display fabric port information:
See Also portShow
switch:admin> fabportshow 4/14
Fabric Port Information:
========================
Port: 62
State: P3
List: 0x10068418
List Count: 0
Flags: 0x280120
nbrWWN: 10:00:00:60:69:80:06:cf
nbrPort: 5
lr_tid: 0x1005dbd8, IDLE STATE
red_ports:
10 11 62 63
Open commands pending:
======================
No commands pending