Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-156 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
fabricLog
2
Note: Enter commands in lowercase only; mixed case is for readability.
Examples To change the number of entries:
See Also fabPortShow, fabStatsShow
switch:admin> fabriclog -s
Time Stamp Input and *Action S, P Sn,Pn Port Xid
===========================================================================
Wed Apr 6 01:08:52 2005
01:08:52.977 SCN Switch Offline A2,NA F2,NA NA NA
01:08:52.977 *Snd SW state: F2 F2,NA F2,NA NA NA
01:08:52.977 *Removing all nodes F2,NA F2,NA NA NA
01:08:52.977 *Cancel F_S_TOV Timer F2,NA F2,NA NA NA
01:08:52.977 *Cancel 2 * F_S_TOV Timer F2,NA F2,NA NA NA
01:08:52.977 *Cancel RDI Receive Timer F2,NA F2,NA NA NA
01:08:52.977 *Cancel RDI Send Timer F2,NA F2,NA NA NA
01:08:52.977 *Cancel 24 * F_S_TOV Timer F2,NA F2,NA NA NA
01:08:52.977 *Cancel EFP Flood Timer F2,NA F2,NA NA NA
01:08:52.977 *Cancel NTP Timer F2,NA F2,NA NA NA
01:08:52.977 *Cancel FAB_SIZE Timer F2,NA F2,NA NA NA
01:08:52.983 1) fabInqData F2,NA F2,NA NA NA
01:08:53.059 2) fabInqData F2,NA F2,NA NA NA
01:08:53.063 *Snd inquiry (1) F2,NA F2,NA NA NA
01:08:53.063 SCN Port Offline;g=0x3e F2,P3 F2,P0 0 NA
01:08:53.063 *Snd port state: P0 F2,P0 F2,P0 0 NA
01:08:53.066 *Removing all nodes from port F2,P0 F2,P0 0 NA
01:08:53.066 SCN Port Offline;g=0x40 F2,T3 F2,P0 1 NA
01:08:53.068 *Removing all nodes from port F2,P0 F2,P0 1 NA
01:08:53.068 *Snd slv port (1) (-1) (2) F2,NA F2,NA NA NA
01:08:53.068 SCN Port Offline;g=0x42 F2,I4 F2,P0 8 NA
01:08:53.072 *Removing all nodes from port F2,P0 F2,P0 8 NA
01:08:53.072 *Snd slv port (8) (-1) (2) F2,NA F2,NA NA NA
Number of entries: 23
Max number of entries: 8192
switch:admin> fabriclog -r 64
Warning: This command will clear the logs.
Are your sure you want to do the resize [y/n]? y
switch:admin> fabriclog -s
Time Stamp Input and *Action S, P Sn,Pn Port Xid
===========================================================================