Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-165
Publication Number: 53-1000240-01
fabSwitchShow
2
Note: Enter commands in lowercase only; mixed case is for readability.
fabSwitchShow
Displays the fabric switch state structure information.
Synopsis fabswitchshow
Description Use this command to display the fabric switch state structure information. This command is strictly for
debugging; it is not intended as a user command.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To display fabric switch state structure:
switch:admin> fabswitchshow
Fabric Switch State Structure Information
=========================================
State: D0
Stage: warm done
Rdi Receive Timer: 0x10069400, IDLE STATE
Unconfirmed Sw Timer: 0x10069508, IDLE STATE
NTP Timer: 0x100695b8, IDLE STATE
ME Timer: 0x10069610, IDLE STATE
Principal Domain: 2
Upstream Port: 64
Principal Wwn: 10:00:00:60:69:80:06:ce
Principal Priority: 0x2
Flags: 0x40
me retry count: 0
inq_sem count: 1
dbg_sem count: 1
ha efp count: 0
fab_q current count: 0
fab_q high water: 8
fab_q age: 0 (sec)
dup xid occurrence: 0
iu nodes outstanding: 0
EFP update port: 2
FWN frames pending 0
test check point: No check point set
fabric license: TRUE
fabric EFP version: 7
last message:
20:30:29.826 *Snd inquiry (4) D0,NA D0,NA NA NA
NTP ports online:
RSCN domain recovery list:
no domain RSCN's to recover
reachable domains:
1 3 4
3 domains reachable
Ports used for EFP/BF/DIA flood:
(output truncated)