Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-168 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
fanEnable
2
Note: Enter commands in lowercase only; mixed case is for readability.
fanEnable
Enables a fan unit.
Synopsis fanenable unit
Description Use this command to set a previously disabled fan unit back to the default RPM speed.
N
ote
This command is not available on nonbladed systems except for the SilkWorm 4100 and 4900.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operand:
unit Specify the fan unit number to enable.
Examples To enable a fan unit:
See Also fanDisable, fanShow
switch:admin> fanenable 1
Fan unit 1 has been enabled