Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-174 Fabric OS Command Reference Manual

Publication Number: 53-1000240-01

fazoneDelete

Note: Enter commands in lowercase only; mixed case is for readability.

fazoneDelete

Deletes a Fabric Assist mode (FA) zone.

Synopsis fazonedelete "fazonename"

Description Use this command to delete an existing Fabric Assist mode zone on a fabric.

This command does not change the defined configuration (which you can view using the cfgShow

command). For the change to become effective, it must be enabled using the cfgEnable command. For

the change to be preserved across switch reboots, it must be saved to nonvolatile memory using the

cfgSave command.

ote

When security is enabled, this command can be issued only from the primary FCS switch.

Operands This command has the following operands:

fazonename Specify the name of the zone to be deleted, in quotation marks. This operand is

required.

Examples To delete a Fabric Assist zone:

See Also fazoneAdd, fazoneCreate, fazoneRemove, fazoneShow

switch:admin> fazonedelete “Blue_fazone”