Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-180 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
fcipPathTest
2
Note: Enter commands in lowercase only; mixed case is for readability.
Examples To run the test on slot 2 with PHY loopback sending 10 frames:
Diagnostics When a failure is detected, the test might report one or more of the following:
PATH_TEST_ERR
PATH_TEST_CHIP_INIT_ERR
PATH_TEST_IMAGE_ERR
PATH_TEST_TIMEOUT_ERR
PATH_TEST_HEARTBEAT_ERR
PATH_TEST_INVALID_RESULT
PATH_TEST_GE_PORT_ENABLE_ERR
PATH_TEST_GE_PORT_DISABLE_ERR
See Also fcipChipTest
switch:admin> fcippathtest --slot 2 -path 2 -nframes 10
Running fcippathtest ..............
Test Complete: fcippathtest Pass 10 of 10
Duration 0 hr, 1 min & 50 sec (0:1:50:942).
passed.