Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-188 Fabric OS Command Reference Manual

Publication Number: 53-1000240-01

fcpProbeShow

Note: Enter commands in lowercase only; mixed case is for readability.

fcpProbeShow

Displays the Fibre Channel Protocol (FCP) probe information.

Synopsis fcpprobeshow [slotnumber/]portnumber

Description Use this command to display the FCP probing information for the devices attached to the specified

F_Port or FL_Port. This information includes the number of successful logins and SCSI INQUIRY

commands sent over this port and a list of the attached devices.

ote

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands This command has the following operands:

slotnumber For bladed systems only, specify the slot number of the port to display, followed

by a slash (/).

portnumber Specify the port number to display, relative to its slot for bladed systems. Use

switchShow to list valid ports. This operand is required.

Examples To display the FCP probe information: