Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-189

Publication Number: 53-1000240-01

fcpRlsShow

Note: Enter commands in lowercase only; mixed case is for readability.

fcpRlsShow

Displays the Fibre Channel Protocol (FCP) Read Link Status (RLS) information.

Synopsis fcprlsshow [slotnumber/]portnumber

Description Use this command to display the FCP RLS information for the specified F_Port or FL_Port. This

information describes the number of loss-of-signal, loss-of-sync, CRC-error, and other failure events that

have been detected on this port.

ote

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands This command has the following operands:

slotnumber For bladed systems only, specify the slot number of the port to display, followed

by a slash (/).

portnumber Specify the port number to display, relative to its slot for bladed systems. Use

switchShow to list valid ports. This operand is required.

Examples To display the FCP RLS information: