Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-192 Fabric OS Command Reference Manual

Publication Number: 53-1000240-01

fcrConfigure

Note: Enter commands in lowercase only; mixed case is for readability.

fcrConfigure

Sets FC Router configuration parameters.

Synopsis fcrconfigure

Description Use this command to configure the FC Router parameters for this platform. This is an interactive

command.

This command cannot execute on a system with the FC Router feature enabled. First disable FC routing

by using either fcrDisable or switchDisable.

ote

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands This command has the following parameter:

Backbone Fabric ID A fabric ID uniquely identifies a fabric in FC Router configurations. The

backbone fabric is the fabric attached to the U_Ports—for example, E/F_Ports—

of this switch. The backbone fabric ID must be unique across all FC Router-

connected fabrics.

Examples To configure FC Router parameters:

See Also fcrDisable, fcrEnable, switchDisable, switchEnable

fcr:admin> fcrconfigure

FC Router parameter set. <cr> to skip a parameter

Backbone fabric ID: (1-128)[100]