Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-213
Publication Number: 53-1000240-01
fdmiCacheShow
2
Note: Enter commands in lowercase only; mixed case is for readability.
fdmiCacheShow
Displays abbreviated remote FDMI device information, according to remote domain ID.
Synopsis fdmicacheshow
Description Use this command to display FDMI cache information for remote domains only.
The state of each remote domain, identified by its domain ID, is shown to be unknown, known,
unsupported, or error.
The revision of the switch also displays, followed by the World Wide Name of the switch.
For HBAs, only the HBA identifiers and registered port lists are displayed. No detailed HBA attributes
are displayed. For registered ports, only port identifier and corresponding HBA are shown; no detailed
port attributes are displayed.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To display the FDMI cache:
See Also fdmiShow
switch:admin> fdmicacheshow
Switch entry for domain 3
state: known
version: v310
wwn: 10:00:00:60:69:90:03:c7
HBAs:
10:00:00:00:c9:25:9b:96
Ports: 1
10:00:00:00:c9:25:9b:96
Total count of devices on the switch is 1