Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-232 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
firmwareDownloadStatus
2
Note: Enter commands in lowercase only; mixed case is for readability.
firmwareDownloadStatus
Displays the status of a firmware download.
Synopsis firmwaredownloadstatus
Description Use this command to display an event log that records the progress and status of the current
firmwareDownload command. The event log is created by the current firmwareDownload command
and is kept until another firmwareDownload command is issued. There is a timestamp associated with
each event.
In systems with two control processor (CP) cards, when firmwareDownloadStatus is run, the event logs
in the two CPs are synchronized. The command can be run from either CP.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To display the status of a firmware download on a SilkWorm switch:
switch:admin> firmwaredownloadstatus
[1]: Fri Feb 15 22:17:03 2008
Firmware is being downloaded to the switch. This step may take up to 30 minutes.
[2]: Fri Feb 15 22:20:54 2008
Firmware has been downloaded to the secondary partition of the switch.
[3]: Fri Feb 15 22:22:19 2008
The firmware commit operation has started. This may take up to 10 minutes.
[4]: Fri Feb 15 22:22:51 2008
Switch is relocating an internal firmware image.
[5]: Fri Feb 15 22:25:15 2008
The commit operation has completed successfully.
[6]: Fri Feb 15 22:25:46 2008
The internal firmware image is relocated successfully.
[7]: Fri Feb 15 22:25:46 2008
Firmwaredownload command has completed successfully. Use firmwareshow to verify
the firmware versions.