Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-248 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
fwConfigure
2
Note: Enter commands in lowercase only; mixed case is for readability.
fwConfigure
Displays and modifies the Fabric Watch configuration.
Synopsis fwconfigure [--enable --port portNumber] | [--disable --port portNumber]
Description Use this command to display and modify threshold information for the Fabric Watch configuration.
Switch elements monitored by Fabric Watch are divided into classes, which are further divided into
areas. Each area can include multiple thresholds. In addition, the command can be used to disable or
enable all thresholds associated with a given port.
N
ote
This command requires a Fabric Watch license.
Not all platforms support fans or power supplies. If you attempt to configure values for these items, an
“ERROR: No threshold available” error message is displayed.
The Fabric Watch classes and areas are provided in the table.
Table 2-12 fwConfigure Fabric Watch Classes and Areas
Class Area
Environmental Temperature
Fan*
Power Supply*
SFP Temperature
RXP
TXP
Current
Voltage
Port Link failure
Sync loss
Signal loss
Protocol error
Invalid words
Invalid CRCS
RX Performance
TX Performance
State Changes
Fabric E_Port downs
Fabric reconfigure
Domain ID changes
Segmentation changes
Zone changes
Fabric<->QL
Fabric logins
SFP state changes
E_Port Same as Port class
F/FL_Port (Optical) Same as Port class