Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-253
Publication Number: 53-1000240-01
fwMailCfg
2
Note: Enter commands in lowercase only; mixed case is for readability.
fwMailCfg
Displays and configures Fabric Watch email alerts.
Synopsis fwmailcfg
Description Use this command to display or modify the configuration and status of the Fabric Watch email alert in
the switch.
Switch elements monitored by Fabric Watch are divided into classes, and email alerts are based on the
classes. Each class can configure one email address as the alert message's receiver.
For an email alert to function correctly, add the CP0 and CP1 IP addresses and hostnames to DNS and
also set the domain name and name server. The ipAddrShow and dnsConfig commands can be used to
set and check this information.
N
ote
This command requires a Fabric Watch license.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To configure email settings:
switch:admin> fwmailcfg
1 : Show Mail Configuration Information
2 : Disable Email Alert
3 : Enable Email Alert
4 : Send Test Mail
5 : Set Recipient Mail Address for Email Alert
6 : Quit
Select an item => : (1..6) [6] 1
Config Show Menu
--------------------------------------
1 : Environment class
2 : SFP class
3 : Port class
4 : Fabric class
5 : E-Port class
6 : F/FL Port (Optical) class
7 : Alpa Performance Monitor class
8 : End-to-End Performance Monitor class
9 : Filter Performance Monitor class
10 : Security class
11 : Resource class
12 : FRU Class
13 : Quit
Select an item => : (0..13) [11] 1
(continued on next page)