Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-255
Publication Number: 53-1000240-01
fwPortDetailShow
2
Note: Enter commands in lowercase only; mixed case is for readability.
fwPortDetailShow
Displays the port information for specified user ports.
Synopsis fwportdetailshow [--p portNumber] | [--s portState]
Description Use this command to print the overall status of the ports specified. The overall status is calculated based
on the following contributors:
Port Errors
LFA Number of link loss occurrences exceeded limit for time period
LSY Number of sync loss occurrences exceeded limit for time period
LSI Number of signal loss occurrences exceeded limit for time period
PER Number of protocol errors exceeded limit for time period
INW Number of invalid words exceeded limit for time period
CRC Number of invalid CRC errors exceeded limit for time period
PSC Port hardware state changed too often
BLP Buffer limited port
SFP Errors
STM SFP temperature is out of specification
SRX SFP receive power is out of specification
STX SFP transmit power is out of specification
SCU SFP current is out of specification
SVO SFP voltage is out of specification
The overall status may be in one of the following:
Healthy Every contributor is healthy
Marginal One or more contributors are in this status
Faulty Faulty hardware
Offline Port has no connectivity or is disabled
If the overall status is not healthy, the contributing factors also are listed.
N
ote
This command requires a Fabric Watch license.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.