Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-290 Fabric OS Command Reference Manual

Publication Number: 53-1000240-01

interopMode

Note: Enter commands in lowercase only; mixed case is for readability.

Examples To enable interoperability mode:

To disable interoperability mode:

To see connections on a switch that is operating in interop mode (ports 8/0, 8/1 show the connections to

switch:admin> interopmode 1

Please make sure the MS Platform service is disabled.

Please run "msPlMgmtDeactivate" command to disable the Platform service.

The switch effective configuration will be lost when the operating mode

is changed; do you want to continue? (yes, y, no, n): [no] y

Interopmode is enabled.

Note: You MUST reboot this switch for the new change to take effect.

switch:admin> interopmode 0

The switch effective configuration will be lost when the operating mode

is changed; do you want to continue? (yes, y, no, n): [no] y

Interopmode is disabled.

Note: You MUST reboot this switch for the new change to take effect.