Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-306 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
iscsiChipTest
2
Note: Enter commands in lowercase only; mixed case is for readability.
iscsiChipTest
Performs functional test of components in iSCSI complex.
Synopsis iscsichiptest --slot slotnumber -testtype type -unit gbeports
Description Use this command to verify the memory of the network processor and iFlipper FPGA.
Operands This command has the following operands:
--slot slotnumber Specifies the slot number that the diagnostic will operate on. The default is set to
0 and designed to operate on fixed-port-count products.
-testtype type Selects the test type to run. By default, the command runs all tests. Valid values
are:
• 0
All of the following tests.
• 1
BCM 1125H SRAM test.
• 2
iFlipper internal register test.
-unit gbeports Specifies the GE port to test. By default all the GE ports in the specified slot
slotnumber will be used. This number will be between 0 and 7. 8 will mean all
ports.
Examples To run iscsichiptest:
See Also iscsiPathTest
switch:admin> iscsichiptest --slot 7 -unit 1 -testtype 0
Running iscsichiptest ..............
Test Complete: iscsichiptest Pass 1 of 1
Duration 0 hr, 3 min & 12 sec (0:3:12:511).
passed.