Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-325
Publication Number: 53-1000240-01
licenseIdShow
2
Note: Enter commands in lowercase only; mixed case is for readability.
licenseIdShow
Displays system license ID.
Synopsis licenseidshow
Description Use this command to display the license ID of the system.
Some features of the switch and the fabric are optional, licensed products. Without a license installed for
such products, the services provided by these features are not available.
For dual-domain systems, a single license enables both logical switches to use these products. The
chassis is assigned a license ID from which a license is generated. Such licenses are locked and are only
functional on the specific system for which they were issued.
This command displays to standard output the system license ID used for both generating and validating
licenses on the system. The license ID format is eight pairs of hexadecimal values, separated by colons.
Each hexadecimal value is between 00 (0) and FF (255).
N
ote
While the format of this identifier might be similar or even identical to other identifiers in the system, no
inferences should be made about the relationships between them as they are subject to change
independently of one another.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To display the license ID:
See Also licenseAdd, licenseHelp, licenseRemove, licenseShow
switch:admin> licenseidshow
a4:f8:69:33:22:00:ea:18