Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-3
Publication Number: 53-1000240-01
aaaConfig
2
Note: Enter commands in lowercase only; mixed case is for readability.
--radiusonly Enable authentication via the RADIUS configuration only. This is used to select
the RADIUS configuration as the primary AAA service. To enable a RADIUS
configuration, as least one server must exist in the configuration.
--radiuslocal Enable the current RADIUS configuration as the primary AAA service and the
switch-local database as the secondary AAA service. When enabled, if RADIUS
authentication fails, the switch-local database will be accessed for AAA services.
--radiuslocalbackup Enable the current RADIUS configuration as the primary AAA service and the
switch local database as the backup AAA service. When enabled, if RADIUS
authentication fails, requests for AAA services are denied. If the RADIUS server
times out, requests are sent to the switch-local database.
Examples To display the current RADIUS configuration:
To change the configuration for server 192.168.233.48:
See Also none
sw:admin> aaaconfig --show
Position ServerPortSecret Timeout(s) Auth-Protocol
1 192.168.233.48 1812 sharedsecret 3 CHAP
2 192.168.233.44 1812 sharedsecret 3 CHAP
3 radserver 1812 private 5 CHAP
Primary AAA Service: Switch database
Secondary AAA Service: None
switch:admin> aaaconfig --change 192.168.233.48 -p 3002 -s newsecret -t 1