Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-337
Publication Number: 53-1000240-01
lsDbShow
2
Note: Enter commands in lowercase only; mixed case is for readability.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operand:
domain Specify the domain number of the LSR to be displayed. This operand is optional;
if omitted, the entire link state database is displayed.
options Always 0.
lsId ID of this LSR. It is identical to the domain number.
advertiser ID (domain number) of the switch that originated this LSR.
incarn Incarnation number of this LSR.
length Total length, in bytes, of this LSR. Includes header and link state
information for all links.
chksum Checksum of total LSR, with exception of lsAge field.
linkCnt Number of links in this LSR. Each link represents a neighbor in
NB_ST_FULL state.
flags Always 0.
LinkId ID of this link. It is the domain number of the switch on the other
side of the link.
out port Port number on the local switch.
rem port Port number of the port on the other side of the link.
cost Cost of this link. The default cost for a 1 Gbit/sec link is 1,000.
costCnt Always 0.
type Always 1.
Table 2-16 lsDbShow Display Fields (Continued)
Field Description