Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-358 Fabric OS Command Reference Manual

Publication Number: 53-1000240-01

nbrStateShow

Note: Enter commands in lowercase only; mixed case is for readability.

nbrStateShow

Displays FSPF neighbor's state.

Synopsis nbrstateshow [slotnumber/][portnumber]

Description Use this command to display information about neighbors to the local switch, or information about a

specific neighbor if a port number is supplied. FSPF defines a neighbor as a remote E_Port interface that

is directly attached to the local switch. The following fields display:

Local Domain ID Domain number of local switch.

Local Port E_Port (interface) on local switch. This value is typically equal to the Area field

reported in the switchShow command.

Domain Domain number of remote switch.

Remote Port E_Port (interface) on remote switch.

State State of the neighbor. The E_Port is used to route frames only if the neighbor is in

NB_ST_FULL state.

Operands This command has the following operands:

slotnumber For bladed systems only, specify the slot number of the port to display, followed

by a slash (/).

portnumber Specify the port number to display, relative to its slot for bladed systems. Use

switchShow to list valid ports. This operand is optional; if omitted, all neighbor

states are displayed.

Examples To display information about switches directly connected to the local switch: