Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-389
Publication Number: 53-1000240-01
pdShow
2
Note: Enter commands in lowercase only; mixed case is for readability.
pdShow
Displays data from a panic dump file.
Synopsis pdshow [panic_dump_file]
Description Use this command to display data from a panic dump file. The panic dump file contains information that
might be useful to determine the cause of the system panic.
When executed without any arguments, this command displays output from the latest panic dump file
available on the switch.
If a panic dump file is specified as an argument, the contents of that specific file are displayed.
Operands This command has the following optional operands:
panic_dump_file Specify the full path name of a panic dump file.
Examples To examine a panic dump file by the name panic_dump located under the directory /tmp:
See Also portLogDump, saveCore
switch:admin> pdshow /tmp/panic_dump
*** CAUTION ***
* Host PLATFORM (current) is: 'Unknown'
* PLATFORM got from pd file is: 'SW12000'
* Some results shown may be incorrect and/or missing
* It is best if this command is run on same PLATFORM as that of pdfile
**************
_______________________********________________________
* File :/core_files/panic/core.pd1038932352 *
* SECTION:PD_MISC *
-----------------------********------------------------
WatchDogRegister=0x0
Section=Startup time: Tue Dec 3 16:06:11 UTC 2002
Kernel= 2.4.19
Fabric OS= v4.1.0_j_dist_1103
Made on= Tue Dec 3 19:07:13 2002
Flash= Tue Dec 3 13:19:06 2002
BootProm= 3.2.0
Section=HA show Output
(output truncated)