Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-406 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
perfDelFilterMonitor
2
Note: Enter commands in lowercase only; mixed case is for readability.
perfDelFilterMonitor
Deletes one or all filter-based performance monitors from a port.
Synopsis perfdelfiltermonitor [slotnumber/]portnumber [monitorid]
Description Use this command to delete a filter-based performance monitor from a port, or all such monitors
associated with a port.
N
ote
This command requires a Brocade Advanced Performance Monitoring license.
This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE
ports.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
slotnumber For bladed systems only, this operand specifies the slot number of the port on
which the monitor is to be deleted, followed by a slash (/).
portnumber Specifies the number of the port on which the monitor is to be deleted, relative to
its slot for bladed systems. Use switchShow for a list of valid ports.
monitorid Specify the monitor number to delete. Monitor numbers are defined when created
and can be displayed using perfShowEEMonitor. This operand is optional. If not
specified, all monitor counters on the port are deleted.
Optionally, a comma can separate the operands. A space is required to separate the operands even when
using commas.
Examples To delete filter monitor 4 from a port, and then all filter monitors from the port:
See Also perfAddUserMonitor, perfShowFilterMonitor
switch:admin> perfdelfiltermonitor 2/3 4
The specified filter-based monitor is deleted.
switch:admin> perfdelfiltermonitor 2/3
This will remove ALL monitors on port 19, continue? (yes, y, no, n): [no] y