Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-415
Publication Number: 53-1000240-01
perfSetPortEEMask
2
Note: Enter commands in lowercase only; mixed case is for readability.
TxSIDMsk Specify the transmitting source ID mask in dd:aa:pp format, with quotation
marks, , where dd is the domain ID mask, aa is the area ID mask, and pp is AL_PA
ID mask. For example, "00:ff:00" uses only the Area ID to trigger the EE monitor.
Specify the following values to turn on or off a specific field:
00 Specifies that the field does not trigger EE monitors.
ff Specifies that the field does triggers EE monitors.
TxDIDMsk Specify the transmtting Destination ID mask, in quotation marks, in dd:aa:pp
format.
RxSIDMsk Specify the recieving Source ID mask, in quotation marks, in dd:aa:pp format.
RxDIDMsk Specify the destination ID mask, in quotation marks, in dd:aa:pp format.
Examples To set the overall mask for end-to-end monitors on a port:
See Also perfAddEEMonitor, perfShowEEMonitor
switch:admin> perfsetporteemask 1/6 "00:00:00" "ff:ff:ff" "00:ff:ff" "ff:00:00"
Changing EE mask for this port will cause ALL EE monitors on this port to be
deleted.
continue? (yes, y, no, n): [no] y
The EE mask on port 6 is set and EE Monitors on this port are deleted