Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-419
Publication Number: 53-1000240-01
perfShowFilterMonitor
2
Note: Enter commands in lowercase only; mixed case is for readability.
perfShowFilterMonitor
Displays all filter-based performance monitor information for a port.
Synopsis perfshowfiltermonitor [slotnumber/]portnumber [interval]
Description Use this command to display all the filter-based monitors defined on the specified port and the traffic
count values.
This command has been deprecated; perfMonitorShow is preferred. Refer to perfMonitorShow for
details regarding this command’s output.
N
ote
This command requires a Brocade Advanced Performance Monitoring license.
This command is deprecated; use perfMonitorShow instead.
This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE
ports.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
slotnumber For bladed systems only, this operand specifies the slot number of the port on
which the monitor is to be displayed, followed by a slash (/).
portnumber Specifies the number of the port on which the monitor is to be displayed, relative
to its slot for bladed systems. Use switchShow for a list of valid ports.
interval Specify an interval, in seconds (5 or more). This operand is optional; if omitted,
this command displays cummulative counts.