Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-421

Publication Number: 53-1000240-01

perfShowPortEEMask

Note: Enter commands in lowercase only; mixed case is for readability.

perfShowPortEEMask

Displays the current address mask for end-to-end performance monitors on a port.

Synopsis perfshowporteemask [slotnumber/]portnumber

Description Use this command to display the current mask shared across all end-to-end (EE) performance monitors

of a port. There are only two commands that can modify the value of the EE mask: perfSetPortEEMask

and perfCfgRestore.

The end-to-end mask has 12 fields:

TxSID Domain: on

TxSID Area: on

TxSID ALPA: on

TxDID Domain: on

TxDID Area: on

TxDID ALPA: on

RxSID Domain: on

RxSID Area: on

RxSID ALPA: on

RxDID Domain: on

RxDID Area: on

RxDID ALPA: on

The fields that are marked “on” are used to trigger end-to-end monitors. The default value of the EE mask

is all fields set to “on.”

ote

This command requires a Brocade Advanced Performance Monitoring license.

This command is deprecated; use perfMonitorShow instead.

This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE

ports.

ote

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands This command has the following operand:

slotnumber For bladed systems only, this operand specifies the slot number of the port on

which the monitor is to be displayed, followed by a slash (/).

portnumber Specifies the number of the port on which the monitor is to be displayed, relative

to its slot for bladed systems. Use switchShow for a list of valid ports.