Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-432 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
portBufferShow
2
Note: Enter commands in lowercase only; mixed case is for readability.
Operands The operands are as follows:
slotnumber For bladed systems only, specifies the slot number of the port group to display,
followed by a slash (/).
portnumber Specifies the number of a port associated with the port group to display, relative
to its slot for bladed systems. Use switchShow for a list of valid ports. This
operand is optional; if omitted, this command displays the long distance buffer
information for all the port groups of the switch. In the case where this command
displays information for all the port groups of the switch, a divider line displays
between the ports of each port group to assist in readability.
Examples To display the long distance information a port:
See Also portCfgLongDistance
switch:user> portbuffershow 17
User Port Lx Max/Resv Buffer Needed Link Remaining
Port Type Mode Buffers Usage Buffers Distance Buffers
---- ---- ---- ------- ------ ------- ---------- ---------
16 - - 0 - -
17 E L1 - 54 54 50km
18 - - 0 - -
19 - - 0 - - 54