Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-448 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
portCfgISLMode
2
Note: Enter commands in lowercase only; mixed case is for readability.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
slotnumber For bladed systems only, specify the slot number of the port to display, followed
by a slash (/).
portnumber Specify the port number to display, relative to its slot for bladed systems. Use
switchShow to list valid ports.
mode Specify 1 to enable ISL R_RDY mode. Specify 0 to disable ISL R_RDY mode.
Examples To enable ISL R_RDY mode on a port:
To disable ISL R_RDY mode on a port:
See Also configure, portCfgLongDistance, portCfgShow
switch:admin> portcfgislmode 1/3, 1
ISL R_RDY Mode is enabled for port 3. Please make sure the PID
formats are consistent across the entire fabric.
switch:admin> portcfgislmode 1/3, 0