Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-455

Publication Number: 53-1000240-01

portCfgNPIVPort

Note: Enter commands in lowercase only; mixed case is for readability.

Examples To enable NPIV functionality on a port:

To display NPIV functionality on a port:

To disable NPIV functionality on a port:

See Also configure, portCfgDefault, portCfgShow

switch:admin> portcfgnpivport 1/3 1

switch:admin> portcfgshow

(output from other ports suppressed)

Ports of Slot 1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

-----------------+--+--+--+--+----+--+--+--+----+--+--+--+----+--+--+--

Speed AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN

Trunk Port ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON

Long Distance .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

VC Link Init .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

Locked L_Port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

Locked G_Port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

Disabled E_Port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

ISL R_RDY Mode .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

RSCN Suppressed .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

Persistent Disable.. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

NPIV capability .. .. .. ON .. .. .. .. .. .. .. .. .. .. .. ..

EX Port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..

where AN:AutoNegotiate, ..:OFF, ??:INVALID.

LM:L0.5

switch:admin> portcfgnpivport 1/3 0