Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-469

Publication Number: 53-1000240-01

portCmd

Note: Enter commands in lowercase only; mixed case is for readability.

interface. This operand is optional.

Examples To verify if packets can be sent to the destination IP address:

To set the path characteristic to source mode on the remote host:

See Also portCfg, portShow

switch:admin> portcmd ping 4/ge0 -s 192.168.100.50 -d 192.168.100.40

Pinging 192.168.100.40 from ip interface 192.168.100.50 on 0/0 with 40 bytes of data

Reply from 192.168.100.40: bytes=40 rtt=0ms ttl=64

Ping Statistics for 192.168.100.40:

Packets: Sent = 4, Received = 4, Loss = 0 (0 loss)

Min RTT = 0ms, Max RTT = 0ms Average = 0ms

switch:admin> portcmd ipperf 4/ge0 -s 192.168.100.50 -d 192.168.100.40 -S

ipperf to 192.168.100.40 from IP interface 192.168.100.50 on 4/0:3227

30s: BW:115.67MBps WBW(30s): 56.70MBps Loss(%):0.0 Delay(ms):2 PMTU:1500