Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-473
Publication Number: 53-1000240-01
portErrShow
2
Note: Enter commands in lowercase only; mixed case is for readability.
portErrShow
Displays port error summary.
Synopsis porterrshow
Description Use this command to display an error summary for all ports. The display contains one output line per port
and shows error counters in ones, thousands (k), or millions (m).
The following fields are displayed:
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
frames tx Frames transmitted
frames rx Frames received
enc in Encoding errors inside frames
crc err Frames with CRC errors
too shrt Frames shorter than minimum
too long Frames longer than maximum
bad eof Frames with bad end-of-frame delimiters
enc out Encoding error outside of frames
disc c3 Class 3 frames discarded
link fail Link failures (LF1 or LF2 states)
loss sync Loss of synchronization
loss sig Loss of signal
frjt Frames rejected with F_RJT
fbsy Frames busied with F_BSY