Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-478 Fabric OS Command Reference Manual

Publication Number: 53-1000240-01

portLogClear

Note: Enter commands in lowercase only; mixed case is for readability.

portLogClear

Clears the port log.

Synopsis portlogclear

Description Use this command to clear the port log. You might want to clear the port log before triggering an activity

so that the log displays only the log events related to that activity.

If the port log is disabled, portLogClear enables it. The port log is disabled automatically when certain

errors occur in order to allow the collection of all the information needed to understand the cause of the

error. When the port log is disabled, the events already present in the log are preserved, but new events

are not collected.

The following errors disable the port log:

FCPH, EXCHBAD

FCPH, EXCHFREE

NBFSM, DUPEPORTSCN

UCAST, RELICPDB

Refer to the Fabric OS Message Reference for more information.

ote

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands none

Examples To clear the port log: