Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-524 Fabric OS Command Reference Manual

Publication Number: 53-1000240-01

portStatsClear

Note: Enter commands in lowercase only; mixed case is for readability.

portStatsClear

Clears the hardware statistics of a specified switch port.

Synopsis portstatsclear [slotnumber/]portnumber

Description Use this command to clear the hardware statistics for a specified port.This command also clears the

hardware statistics for the associated three ports in the target port's quad, including ALPA-based CRC

monitor, End-to-End monitor, and Filter-based performance monitor statistics. Inter-Switch Link (ISL)

monitor statistics are not cleared by this command. For platforms with a Bloom-based ASIC, the

command clears the hardware statistics for all ports in the target port quad.

ote

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands This command has the following operands:

slotnumber For bladed systems only, specify the slot number of the port to be cleared,

followed by a slash (/).

portnumber Specify a port number to be cleared, relative to its slot for bladed systems. Use

switchShow to display a list of valid ports.

Examples To clear the statistics for a port: