Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-531
Publication Number: 53-1000240-01
portSwapEnable
2
Note: Enter commands in lowercase only; mixed case is for readability.
portSwapEnable
Enables the portswap feature.
Synopsis portswapenable
Description Use this command to enable the portswap feature. The portSwap command cannot be used unless the
feature is first enabled with this command.
The enabled state of the portswap feature is persistent across reboots and power cycles.
N
ote
Enabling or disabling the portswap feature does not effect previously performed portswap operations.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To enable the portswap feature:
See Also portSwap, portDisable, portEnable, portShow, portSwapDisable, portSwapShow, switchShow
switch:admin> portswapenable