Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-532 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
portSwapShow
2
Note: Enter commands in lowercase only; mixed case is for readability.
portSwapShow
Displays the state of the portswap feature.
Synopsis portswapshow
Description Use this command to display the enabled state of the portswap feature, as well as port and area
information for those ports whose area number id different from the default area number. The default
area number of a port is same as its switch port number.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To display the enabled state of the portswap feature and information for ports whose area numbers have
been swapped:
See Also portSwap, portDisable, portEnable, portShow, portSwap, portSwapDisable, portSwapEnable,
switchShow
switch:admin> portswapshow
PortSwap is enabled
Slot Slotport Swport Area
============================================
2 2 18 19
2 3 19 18