Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-537
Publication Number: 53-1000240-01
portZoneShow
2
Note: Enter commands in lowercase only; mixed case is for readability.
portZoneShow
Displays the enforced zone type of the F/FL-ports of a switch.
Synopsis portzoneshow
Description Use this command to display the enforced zone type of the F/FL-ports of a switch.
Output shows virtual port number (decimal), physical port number (decimal), online status (and if online,
port type). If the current zone configuration has been diabled by cfgDisable, the fabric is in nonzoning
mode, in which all devices see each other. When default zoning is enabled with "No Access" mode, "No
Effective configuration: (No Access)" is displayed.
N
ote
This command requires a Brocade Advanced Zoning license.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To display the zone membership information of ports:
See Also cfgShow, switchShow
switch:user> portzoneshow
[OUTPUT TRUNCATED]
PORT: 160 (160) Offline
PORT: 161 (161) Offline
PORT: 162 (162) Offline
PORT: 163 (163) Offline
PORT: 164 (164) Offline
PORT: 165 (165) Offline
PORT: 166 (166) Offline
PORT: 167 (167) Offline
PORT: 168 (168) FL-Port Enforcement: HARD WWN defaultHard: 0 IFID:
0x4332000a
PORT: 169 (169) Offline
PORT: 170 (170) Offline
PORT: 171 (171) Offline
PORT: 172 (172) Offline
PORT: 173 (173) Offline
PORT: 174 (174) Offline
PORT: 175 (175) Offline
PORT: 176 (176) F-Port Enforcement: HARD WWN defaultHard: 0 IFID:
0x4342002a
PORT: 177 (177) Offline
PORT: 178 (178) Offline
PORT: 179 (179) Offline
PORT: 180 (180) Offline
[OUTPUT TRUNCATED]