Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-550 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
secAuthSecret
2
Note: Enter commands in lowercase only; mixed case is for readability.
secAuthSecret
Manages the DH-CHAP shared secret key information.
Synopsis secauthsecret [--show] [--set] [--remove value | --all]
Description Use this command to manage the DH-CHAP shared secret key database used for authentication. This
command displays, sets, and removes shared secret key information from the database or deletes the
entire database. If you are performing set or remove operations, when the command is completed new
data is saved persistently. New data is effective with the next authentication request. The configuration
applies to a switch instance only.
N
ote
A Brocade Security license is required to run this command in non-secure as well as secure mode.
Operands This command has the following operands:
--show Lists the WWNs for which shared secret is configured.
--set Sets shared secrets with a WWN. NOTE: when setting secrets for an entry of an
EX_Port type, the wwn of the entry must be specified.
--remove [wwn | domain | swname]
Removes the specified WWN entry from the database. If a domain name is
specified, it is converted to a WWN and then the entry is removed. If no option is
specified, command is interactive.
--remove --all Deletes the entire secret key database.
N
ote
When setting secrets for an entry of an EX_Port type, the WWN of the entry must be specified.
When removing an entry of an EX_Port type, the WWN of the entry must be specified.
Examples To list the shared secret WWN:
switch:admin> secauthsecret --show
WWN DId Name
-----------------------------------------------
10:00:00:60:69:80:5b:e8 1 switch