Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-557
Publication Number: 53-1000240-01
secFabricShow
2
Note: Enter commands in lowercase only; mixed case is for readability.
secFabricShow
Displays security-related fabric information.
Synopsis secfabricshow
Description This command displays the security-related information about the fabric.
The information displayed is as follows:
Role Displays whether the switch is the primary FCS, backup FCS, or not FCS.
WWN Displays the World Wide Name of the switch.
DId Displays the domain of the switch.
Status Displays the security state of the switch:
Ready This switch is in a stable state.
Busy This switch is updating its security database.
Error This switch's security database is inconsistent with the primary FCS.
Enet IP Addr Displays the Ethernet IP address.
Name Displays the switch name.
NoResp Displays if the switch did not respond to the status query.
Unknown Displays if the switch is in an unknown state.
N
ote
This command can only be issued in secure mode.
This command must be issued from a sectelnet or SSH session.
When this command is issued on multiple switches in the fabric, one or more of these switches can
display a status of busy.
Operands none
Examples To display security-related fabric information on the primary FCS switch:
See Also secPolicyDump, secPolicyShow
switch:admin> secfabricshow
Role WWN DId Status Enet IP Addr Name
================================================================
non-FCS 10:00:00:60:69:10:03:23 1 Ready 192.168.100.148 "nonfcs"
Backup 10:00:00:60:69:00:12:53 2 Ready 192.168.100.147 "backup"
Primary 10:00:00:60:69:22:32:83 3 Ready 192.168.100.135 "switch"
___________________________________________
Secured switches in the fabric: 3