Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-565

Publication Number: 53-1000240-01

secModeEnable

Note: Enter commands in lowercase only; mixed case is for readability.

--quickmode This option is a shorthand notation for a combination of the

--currentpwd, --lockdown, and --fcs "*" options. On successful execution of the

command, security is enabled in the fabric with all switches being FCS, all

switches having passwords identical to that of the primary FCS and SCC, and

DCC policies capturing and maintaining the current configuration of the fabric.

This option can be used only on a fabric with secure mode disabled and only when

the command is run on the switch specified as the primary FCS switch. This

option should not be used when the fabrix is connect to a FC Router.

If no operand is specified, the session becomes interactive and the user is prompted to enter FCS switch

members and passwords.

If the --currentpwd option is not used, the session becomes interactive and the user is prompted to enter

new passwords for root, factory, admin, user, and non-FCS admin accounts.