Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-567
Publication Number: 53-1000240-01
secModeEnable
2
Note: Enter commands in lowercase only; mixed case is for readability.
To enable secure mode using --quickmode:
To enable secure mode using --currentpwd --fcs "*":
See Also secFabricShow, secModeDisable, secModeShow, secPolicyShow, userRename
fcsprimary:admin> secmodeenable --quickmode
Your use of the certificate-based security features of the software
installed on this equipment is subject to the End User License Agreement
provided with the equipment and the Certification Practices Statement,
which you may review at http://www.switchkeyactivation.com/cps. By using
these security features, you are consenting to be bound by the terms of
these documents. If you do not agree to the terms of these documents,
promptly contact the entity from which you obtained this software and do
not use these security features.
Do you agree to these terms? (yes, y, no, n): [no] y
This command requires Switch Certificate, Security license and Zoning
license to be installed on every switch in the fabric.
PLEASE NOTE: On successful completion of this command, login sessions
may be closed and some switches may go through a reboot to form a secure
fabric.
Non-FCS admin password will be set the same as FCS admin password.
ARE YOU SURE (yes, y, no, n): [no] y
Please enter current admin account password:
Secure mode is enabled.
fcsprimary:admin> secmodeenable --currentpwd --fcs "*"
Your use of the certificate-based security features of the software
installed on this equipment is subject to the End User License Agreement provided
with the equipment and the Certification Practices Statement, which you may review
at http://www.switchkeyactivation.com/cps. By using
these security features, you are consenting to be bound by the terms of these
documents. If you do not agree to the terms of these documents,
promptly contact the entity from which you obtained this software and do
not use these security features.
Do you agree to these terms? (yes, y, no, n): [no] y
This command requires Switch Certificate, Security license and Zoning
license to be installed on every switch in the fabric.
PLEASE NOTE: On successful completion of this command, login sessions
may be closed and some switches may go through a reboot to form a secure
fabric.
Non-FCS admin password will be set the same as FCS admin password.
ARE YOU SURE (yes, y, no, n): [no] y
Please enter current admin account password:
Secure mode is enabled.