Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-27
Publication Number: 53-1000240-01
aliDelete
2
Note: Enter commands in lowercase only; mixed case is for readability.
aliDelete
Deletes a zone alias.
Synopsis alidelete "aliName"
Description Use this command to delete a zone alias.
This command changes the defined configuration. For the change to be preserved across switch reboots,
it must be saved to nonvolatile memory using the cfgSave command. For the change to become effective,
an appropriate zone configuration must be enabled using the cfgEnable command.
N
ote
This command requires a Brocade Advanced Zoning license.
When secure mode is enabled, this command can be issued only from the primary FCS switch.
Operands This command has the following operand:
"aliName" Specify the name of zone alias to be deleted. This operand must be enclosed in
quotation marks. This operand is required.
Examples To delete the zone alias array2:
See Also aliAdd, aliCreate, aliRemove, aliShow
switch:admin> alidelete "array2"