Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-588 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
secPolicyShow
2
Note: Enter commands in lowercase only; mixed case is for readability.
secPolicyShow
Displays an existing security policy.
Synopsis secpolicyshow ["policy_set"[", name"]]
Description Use this command to display the members of an existing policy in the Active or Defined security policy
set.
This command displays the policy database one page at a time. Use secPolicyDump to display the policy
database without page breaks.
In secure mode this command displays the security policy database in effect on all the FCS switches in
the fabric and can be issued from all FCS switches.
In non-secure mode, this command displays the security policy database in effect on the local switch
only. Use the fddCfg command to manage the fabric-wide distribution of a security policy database.
Operands This command has the following operands:
"policy_type" Specify which policy to display, in quotation marks. Valid values are "Active",
"Defined", or “*” for both Active and Defined. This operand is optional. If not
specified, all databases are displayed.
"name" Specify the name of a security policy you would like to view, in quotation marks.
This operand is optional. Valid values for this operand are:
• DCC_POLICY_nnn
•FCS_POLICY
• TELNET_POLICY
• HTTP_POLICY
•API_POLICY
•RSNMP_POLICY
•WSNMP_POLICY
•SES_POLICY
• MS_POLICY
• SERIAL_POLICY
• FRONTPANEL_POLICY
•SCC_POLICY
• OPTIONS_POLICY
The specified policy name must be capitalized.
The DCC_POLICY_nnn name has the common prefix DCC_POLICY_ followed
by a string of user defined characters. These characters do not have to be
capitalized like regular policy names, but are case sensitive.
In non-secure mode, this command displays only SCC and DSS policies.